Tuesday, March 17, 2009

Webcam and Hardware Issues

My webcam is not that good. I figured out when I reach those *astonishing* 6 FPS. Ok, time to move on!
I have a friend that lives in Australia and is coming to Brazil in the end of February. He is one of the responsibles for my commitment with this project and he's surely one of the most excited about the results these studies can bring. By coming to Brazil, I've asked him to bring me a Microsoft Vx-1000 webcam.
I found lots of information on the NuiGroup Forum. It's really easy to disassemble and put up the infrared filter. The pictures above I took from this blog that is held from a NuiGroup Member. I will get in touch with him as soon as I have the camera.
Maybe I will get in touch with him due to his successful attempt on lighting up the prototype with an infrared array. This one thing will be a future problem, once I can't find this part here in Brazil. Probably to get this issue solved, getting in touch with some brazilian multitouch agencies would be a better idea.

I'll work this out and post later on.

Monday, March 16, 2009

Next Steps



Hey! I'm back!

Last post I wrote lots and lots of things, used the "ctrl+x" to cut the content and copy into another post, when i used "ctrl+c" to copy another file and lost all the information written. I got mad. Didn't write anything else. Now I'm good, got a lesson learned. Now let's get back to work.

I've read a post at engadget saying that OLED displays will rocketlaunch on 2011. If that so, all I need, is to be a multi-touch master until that happens, so I'll be able to create the best interfaces for the world's best consumer eletronics. While most people are dreaming about it, I'm playing with it.

News day! I've been searching for actionscript tutorials and everything that could help me learn AS3 quickly. It's been hard, due to my lack of base knowledge, so I decided start looking for a professional Flash school. Well, price kinda scared me: about R$ 800 (like US$ 400) for a 16 hours of classes on the Basic I level. Ok, I'll figure it out myself.

I still didn't make any attempts on using flash apps created by me. Actually I still havent developed anything. All I got 'till now are methods, events and properties. These are the very base of AS, as much as Symbols, Movie Clips and Buttons are for Flash itself. It's essential to understand them to have a solid knowledge for future development. But meanwhile I've read some things at the forum and starters usually gets issues on copy/pasting the codes available there. Still, I will give it a shot soon, probably today.

What I was really counting on for moving forward with testing and spending time with Flash was my new computer that I've bought more then 20 days ago. It arrived to me burned out, so there started all the pain to replace it, struggling for all this period. They (@ americanas.com brazilian store) are promissing to deliver 2 days from now. I'm believing this one, but they have made so many promisses, that I don't know the truth by now.

Well, I'm done for today.

Monday, March 9, 2009

Up and running!

Yeah! Here we go! Me going Multitouch!
After several attempts, with small steps, I achieved a happy ending.
My last "barrier" was Java. Believe me, Java files were corrupted on my computer, so installing it solved it all. I'll soon make another post to show what are the basic steps to accomplish this mission, incluiding all screens you will be prompted (like that one that says "Start" - it exists!).

Friday, March 6, 2009

It's time for tbeta

Ok, now I've reached another level! That's what I was looking for.

Searching an answer for the misterious "no way" to calibrate the Touchlib app, I faced this enhanced software, able to show me everything I wanted: BLOBS!

Blobs came out and gave me hope. I could even see a brighter future ahead, until demo software didn't respond to my touches. TUIO was active, and everything was setup acording to plan as described on its homepage but nothing. I followed all the instructions (except for #3 that says to press "Start". Where? Is that the issue?).

Happiness, but not for very long. Ok, I'll stop saying that.
Blobs were my last week's wish and I got them. Good advance.

Week goal: Make demos work!

Just for the record, nice road ahead with software knowledge.
AS3 is on its way to my brain.

Next post will be out with news I've found on MT market.

Wednesday, March 4, 2009

Hardware 1 x 0 Software Calibration

Yesterday I've got some progress on hardware. The piece of acrylic fit very nicely on the box, as seen on the picture above. The acrylic is folded piece, so the paper I used was very stretched on the midst of it.
Having setup all hardware (box, camera, touching surface), it was time to use my old friend ConfigApp. I've taken pictures of the process so I'll be able to keep track of progress, even though today's advance were nothing big. The screen shown above is the main calibration window. I posted it here wondering wheater my camera is bad or this is a common ajust that is needed to be done when entering the configapp. Anyone?
I carried on with the calibration. This is what I got: The image from the webcam fitting the entire screen.
The finger point out started!
Blobs were convincent. For me, not for ConfigApp. I've tried calibrating like 5 times, changing the position of the box, to get diferent shadows.

About shadows, does it shadow interfere that much on calibration?
From one of my yesterday's experience, I would say it shouldn't be a major problem.
Yes, I've done this. I've engaged on a laser calibration try-out. Response? None.

---

Is there any problem on the process and buttons I'm pressing while calibrating?
Here's what I do: Open the "ConfigApp". Press Enter. Resize the screen to fit in the entire area. Press C to start calibrating. Press and hold my finger on the spot of the upper left corner. Press "Space" key. Release my finger. Position my finger in the next green cross. Hold it. "Space" key again. And so on so far until the last one. After all that, press "ESC" and try to run "Smoke_Demo" or any other software in there. Nothing changes a bit.

ConfigApp has won this battle, but not the war.

Monday, March 2, 2009

First major step on hardware

It's going to be tonight ladies and gentleman! Setup your carton boxes and duct tapes! This will be the first decent attempt. Now that I possess an "office paper acrylic" (hope this is the right name) , that is still an acrylic anyway, with the right config instructions, let's see what we can get!

There are 2 concerns for today's try-outs:

- Making the acrylic's corner turn into a "Polished Edge" (like this)
- A material to use as "Compliant Surface" to make difused light go towards camera also preventing external light to fade the blobs. This is hard.

Soon we will have news to tell.

Bookmarks

This small post is just to share some bookmarks I've done with interesting sites for reference.

**The Best for starters**
ActionScript3 - ADOBE Guide


ActionScript Guide - From Basic to Advanced Techniques
Creating Flash Game
Engine Behind Splitter Games

NuiGroup ~ Wiki Interesting Info for starters
Touchlib
Installing on Windows
ConfigApp
LEDs
DI Plans

//end
Sure I'm that addicted on this programming deal.